PT 4X1-BE

https://www.phoenixcontact.com/us/products/2839363 Surge protection base element - PT 4X1-BE - 2839363 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Base element for protective plug PT with protective circuit for 4 conductors of signal circuits grounded on one side, with bridge between the connections 3-4 (GND) and 9-10, for mounting on NS 35/7.5 and NS 35/15, housing width: 17.5 mm Product Features  Plugs can be checked with CHECKMASTER  Installed in conjunction with the PT 4x1...-BE base element  Maximum ease of maintenance thanks to the two-piece design  Base element remains an integral part of the installation  Consistent plug-in signal circuit protection  Protection for four conductors with common reference potential  Impedance-neutral disconnection of plug for test and maintenance purposes   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 55.81 GRM Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 89.8 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm Complete module width 17.7 mm Complete module depth 65.5 mm 10/10/2014   Page 1 / 6 https://www.phoenixcontact.com/us/products/2839363 Surge protection base element - PT 4X1-BE - 2839363 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP20 General Inflammability class according to UL 94 V0 Color black Mounting type DIN rail: 35 mm Type DIN rail module, two-section, divisible Protective circuit Nominal current IN 300 mA (45°C) Resistance in series 4.7 Ω 10 % Surge protection fault message None Connection data Connection method Screw connection Connection type IN Screw terminal blocks Connection type OUT Screw terminal blocks Screw thread M3 Tightening torque 0.5 Nm Stripping length 8 mm Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130803 eCl@ss 7.0 27130803 eCl@ss 8.0 27130803 10/10/2014   Page 2 / 6 https://www.phoenixcontact.com/us/products/2839363 Surge protection base element - PT 4X1-BE - 2839363 Classifications ETIM ETIM 2.0 EC000472 ETIM 3.0 EC000472 ETIM 4.0 EC000472 ETIM 5.0 EC000472 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals UL Listed / GOST / GL Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Listed  GOST  GL  10/10/2014   Page 3 / 6 https://www.phoenixcontact.com/us/products/2839363 Surge protection base element - PT 4X1-BE - 2839363 Accessories Accessories Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm     Shield connection Shield connection - SSA 5-10 - 2839512 Shield fast connection for conductor diameters 5 - 10 mm. Potential connection cable: 200 mm, black     Shield connection - SSA 3-6 - 2839295 shield fast connections for conductor diameter 3 - 6 mm. Potential connection cable: 200 mm, black     Terminal marking 10/10/2014   Page 4 / 6 https://www.phoenixcontact.com/us/products/2839363 Surge protection base element - PT 4X1-BE - 2839363 Accessories Zack marker strip - ZB 5 :UNBEDRUCKT - 1050004 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.1 x 10.5 mm     Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm     Zack marker strip - ZB 5,8:UNBEDRUCKT - 2715209 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 5.8 mm, Lettering field: 5.75 x 10.5 mm     Drawings Dimensioned drawing 90 51,5 65,5 44,8 The figure shows the complete module consisting of a base element and connector 10/10/2014   Page 5 / 6 https://www.phoenixcontact.com/us/products/2839363 Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 6 / 6